Project Description

    Nissan gearbox housing 

    Technical specification
    Rough weight: 18/75 Kg
    Material:Ductile iron-GG25
    Application: Passenger cars

    Nissan gearbox housing

    Includes a set of gearbox gears that protect the teeth inside the gearbox. It should be free of any porosity in the production of cast iron parts

    Contact us for more information

    Nissan gearbox housing

    The gearbox housing is made of gray cast iron and includes a set of gearbox gears. This part is connected to the car engine.

    The engine must have a means of stopping until the vehicle stops. The device that does this is called the transmission gearbox. A subset of the gearbox parts can be referred to as the gearbox shell. Prevent

    In the gearbox shell, the internal parts are mounted on the shell. The gearbox also holds the oil inside

    The easiest way to find the problems in the car gearbox shell before you are serious, is to physically control the MOUNTS TRANSMISSION gearbox shell, by placing the car on the ramps you can insert it into the gearbox if You see even the smallest problem, you should look for changes soon. If the problem becomes serious, you will start to see vibrations in the car gearbox, because the shell moves freely and the shaft drive moves it in motion. Your engine has the power to use the combustion of the fuel tank. To be able to, the computer can make sure that the engine is working properly and that the thumb drive is rotating in response to your foot in the accelerator..

    In the middle of the process, it is wrapped, transferred and secured to the receiver connection base to maintain it, ensuring that it works properly every time it can put the vehicle in the wheel and start driving. Mountain transport is very important for vehicle use. The reason is very simple: the transmission is very heavy and the mountain helps to support this weight by distributing it along its entire length. The mountain also performs much more accurately, even when you are moving fast or over the road from the driver, so it does not transfer its rotation and crankshaft by accelerating from the engine or housing. It is easy to find, but I can hardly buy it because it is under the vehicle and connected directly to the transmission.

    It is also attached to the chassis of the vehicle, the strongest part, so it can prevent the transmission from falling, and it must be in a perfectly straight position. It is made of a very strong metal, because the transmission is very heavy, and sometimes it is painted in different colors, so it is easier to find outdoors and find. With two simple mazes to keep it in the chassis, it does not look like a big deal, but it is quite it. You will realize how much of a deal happens when something goes wrong.

    Because it can break when it reaches a certain age or when the vehicle is involved in a very heavy impact. If the blow is severe enough, the mountain can be completely snap, so that the transmission no longer holds, or the slightest failure or crack can cause a complete break if they are not addressed immediately. When the rider does not hold properly, your transmission can be damaged, as can some (expensive) parts of your engine.

    Product customers

    The following factories and companies are customers of this product

    • Iran Khodro

    • Saipa

    • Bahman khodro

    • Isaco

    • Pars khodro